|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Inner Conductor-Solid BC, Dielectric Foam- PE, Outer Conductor-Aluminum Tape, Overall Braid-Tinned Copper, Jacket- PE Black
|
450 ohm, #18, 19 strand copper clad steel ladder line, PE jacket. <1500W
|
RG-213: 13 AWG (7x.0296") Tinned Copper: Dielectric Layer .098" Solid Polyethylene: Shield Type, Tinned Copper Braid: Jacket, White PVC Type IIA (Non-contaminating)
|
250 FT. 18 AWG, Black PE - Polyethylene Coat highly UV & abrasion resistant.Break Strength 117 lbs. 19 strands of copper clad Steel Wire. Weighs 6.2 lbs per 1000 FT.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
450 ohm, #18 solid copper clad steel ladder line, PE jacket "Sold By The Foot" Just enter the total number of feet needed in the Qty Box
|
RG 8/U - 50-57 OHM Coax - 13 AWG 7/21 Bare Copper; Gas Injected Foamed PE; Bare Copper Braid 97% Cov; Black PVC Jacket; .405" NOM OD; 82% Velocity
|
M17/111-RG303 Solid
silver-coated copper clad steel conductor with a polytetrafluoroethylene
(PTFE) dielectric, fluorinated ethylene propylene (FEP) jacket, and an
overall braid shield of 36 AWG silver-coated copper braid shield
|
300 ohm, #18, 19 strand copper clad steel ladder line, PE jacket
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Break Strength 2600 Lbs. Double braided, polyester (AKA Dacron). UV, mildew, rot and stretch resistant low coefficient of friction & high resistance to abrasion.
|
14 AWG, 7 Strands - Bare Hard Drawn Copper Wire
|
300 ohm, #18, 19 strand copper clad steel ladder line, PE jacket
|
14 AWG, 7 Strands - Bare Copper Clad Steel Wire:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
250FT - RG-8X type, 16 AWG stranded (19x29) .058" bare copper conductor, gas-injected FPE insulation, bare copper braid shield (95% coverage), PVC jacket.
|
UHF female / UHF female - 10" Bulkhead
• Solid MACHINED BRASS body!
• 16 point ends
• Flawless nickel plating
• Firmly secured DELRIN dielectric center for higher power handling ability
• GOLD plated center pin
• Excellent fit with large with large chassis nuts panel nuts.
|
The LMR-400 assembly low loss braided coaxial cable. The 50 Ohm coax cable has a stranded outer conductor and a bare copper center conductor. It is 100 percent foil and 88 percent coverage braided shield prevents loss
|
Nickel (UHF) & Gold (SMA) Plated Brass Body, Nickel (UHF) & Gold (SMA) Plated Brass Center Pin, Delrin (UHF) & PTFE (SMA) Dielectric, “D/TN/GN/G”
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
200FT - Series 6, 18 AWG solid .040" bare copper-covered steel conductor, gas-injected foam polyethylene insulation, Duobond® II + aluminum braid shield (60% coverage), PVC jacket.
|
Break Strength 260 Lbs. Double braided, polyester (AKA Dacron). UV, mildew, rot and stretch resistant low coefficient of friction & high resistance to abrasion.
|
250 FT. 26 AWG, Black PE - Polyethylene Coat highly UV & abrasion resistant. Often referred to as "Kite Wire". Break Strength 25 lbs. 19 strands of copper clad Steel Wire. Weighs.38 lbs per 1000 FT.
|
RF-9913, 50 ohms, PVC-I 0.405" Jacket, Air Dielectric spiral wrapped PE, #9.5 Conductor, 88% braid plus 100% foil Shield, 84% Velocity of Propagation, and a Capacitance of 24.0 pf/ft.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LMR-600UF 1/2 inch Ultra flex cable is super flexible due to its stranded center conductor. It has a tinned copper outer conductor that is taped and has a UV-resistant polyethylene jacket for outdoor use. 
|
PVC-IIA C-17 Mil Spec Non-Contaminating .405" Jacket, PE Dielectric, #12 Stranded Conductor, 96% braid Shield, 66% Velocity of Propagation and a Capacitance of 30.8 pf/ft
|
14 AWG, 7 Strands - Bare Copper Clad Steel Wire:
|
Inner Conductor Stranded BC 0.056 (1.42),
Dielectric Foam Polyethylene 0.150 (3.81),
Outer Conductor Aluminum Tape 0.155 (3.94),
Overall Braid Tinned Copper 0.178 (4.52),
Jacket Black Thermoplastic Elastomer 0.240 (6.10)
|
|
|
