The Davis RF RG-58/U coaxial cable is a type of RF coaxial cable commonly used for general-purpose RF transmission, antenna connections, and other applications requiring relatively low signal loss over moderate distances. Here are its typical specifications:
Electrical Specifications:- Impedance: 50 ohms
- Capacitance: ~24.5 pF/ft (~80.4 pF/m)
- Velocity Factor: Approximately 0.66 (depends on dielectric used)
- Frequency Range: Suitable for frequencies up to about 1 GHz (performance may vary with length and use case)
- Maximum Voltage Rating: Generally around 1,900 to 2,000 Volts (peak, depending on specific product variants)
Physical Specifications:- Outer Diameter: Approximately 0.195 inches (4.95 mm)
- Center Conductor: Stranded or solid copper (typically 20 AWG)
- Dielectric: Solid polyethylene (typically white)
- Shielding: Single braid shield (copper or tinned copper braid)
- Jacket Material: Often PVC (polyvinyl chloride) with UV-resistant variants available for outdoor use
Typical Uses:- Amateur radio
- Antenna feed lines for mobile or base stations
- Low-power RF and signal applications
It is important to confirm exact specification
Our RG-58 cable is a
high-quality JAN type A/U design good for HF-UHF mobile applications and low
power HF radios. Specs: 50 ohm, Black PVC .195" Jacket, Polyethylene Dielectric,
#20 Stranded, tinned copper Conductor, 96% tinned copper braid Shield, 66%
Velocity of Propagation, and a Capacitance of 30.5 pf/ft
|
|
|